experimental research design

• Privacy Policy

Home » Experimental Design – Types, Methods, Guide

Experimental Design – Types, Methods, Guide

Table of Contents

Experimental design is a structured approach used to conduct scientific experiments. It enables researchers to explore cause-and-effect relationships by controlling variables and testing hypotheses. This guide explores the types of experimental designs, common methods, and best practices for planning and conducting experiments.

Experimental Design

Experimental design refers to the process of planning a study to test a hypothesis, where variables are manipulated to observe their effects on outcomes. By carefully controlling conditions, researchers can determine whether specific factors cause changes in a dependent variable.

Key Characteristics of Experimental Design :

• Manipulation of Variables : The researcher intentionally changes one or more independent variables.
• Control of Extraneous Factors : Other variables are kept constant to avoid interference.
• Randomization : Subjects are often randomly assigned to groups to reduce bias.
• Replication : Repeating the experiment or having multiple subjects helps verify results.

Purpose of Experimental Design

The primary purpose of experimental design is to establish causal relationships by controlling for extraneous factors and reducing bias. Experimental designs help:

• Test Hypotheses : Determine if there is a significant effect of independent variables on dependent variables.
• Control Confounding Variables : Minimize the impact of variables that could distort results.
• Generate Reproducible Results : Provide a structured approach that allows other researchers to replicate findings.

Types of Experimental Designs

Experimental designs can vary based on the number of variables, the assignment of participants, and the purpose of the experiment. Here are some common types:

1. Pre-Experimental Designs

These designs are exploratory and lack random assignment, often used when strict control is not feasible. They provide initial insights but are less rigorous in establishing causality.

• Example : A training program is provided, and participants’ knowledge is tested afterward, without a pretest.
• Example : A group is tested on reading skills, receives instruction, and is tested again to measure improvement.

2. True Experimental Designs

True experiments involve random assignment of participants to control or experimental groups, providing high levels of control over variables.

• Example : A new drug’s efficacy is tested with patients randomly assigned to receive the drug or a placebo.
• Example : Two groups are observed after one group receives a treatment, and the other receives no intervention.

3. Quasi-Experimental Designs

Quasi-experiments lack random assignment but still aim to determine causality by comparing groups or time periods. They are often used when randomization isn’t possible, such as in natural or field experiments.

• Example : Schools receive different curriculums, and students’ test scores are compared before and after implementation.
• Example : Traffic accident rates are recorded for a city before and after a new speed limit is enforced.

4. Factorial Designs

Factorial designs test the effects of multiple independent variables simultaneously. This design is useful for studying the interactions between variables.

• Example : Studying how caffeine (variable 1) and sleep deprivation (variable 2) affect memory performance.
• Example : An experiment studying the impact of age, gender, and education level on technology usage.

5. Repeated Measures Design

In repeated measures designs, the same participants are exposed to different conditions or treatments. This design is valuable for studying changes within subjects over time.

• Example : Measuring reaction time in participants before, during, and after caffeine consumption.
• Example : Testing two medications, with each participant receiving both but in a different sequence.

Methods for Implementing Experimental Designs

• Purpose : Ensures each participant has an equal chance of being assigned to any group, reducing selection bias.
• Method : Use random number generators or assignment software to allocate participants randomly.
• Purpose : Prevents participants or researchers from knowing which group (experimental or control) participants belong to, reducing bias.
• Method : Implement single-blind (participants unaware) or double-blind (both participants and researchers unaware) procedures.
• Purpose : Provides a baseline for comparison, showing what would happen without the intervention.
• Method : Include a group that does not receive the treatment but otherwise undergoes the same conditions.
• Purpose : Controls for order effects in repeated measures designs by varying the order of treatments.
• Method : Assign different sequences to participants, ensuring that each condition appears equally across orders.
• Purpose : Ensures reliability by repeating the experiment or including multiple participants within groups.
• Method : Increase sample size or repeat studies with different samples or in different settings.

Steps to Conduct an Experimental Design

• Clearly state what you intend to discover or prove through the experiment. A strong hypothesis guides the experiment’s design and variable selection.
• Independent Variable (IV) : The factor manipulated by the researcher (e.g., amount of sleep).
• Dependent Variable (DV) : The outcome measured (e.g., reaction time).
• Control Variables : Factors kept constant to prevent interference with results (e.g., time of day for testing).
• Choose a design type that aligns with your research question, hypothesis, and available resources. For example, an RCT for a medical study or a factorial design for complex interactions.
• Randomly assign participants to experimental or control groups. Ensure control groups are similar to experimental groups in all respects except for the treatment received.
• Randomize the assignment and, if possible, apply blinding to minimize potential bias.
• Follow a consistent procedure for each group, collecting data systematically. Record observations and manage any unexpected events or variables that may arise.
• Use appropriate statistical methods to test for significant differences between groups, such as t-tests, ANOVA, or regression analysis.
• Determine whether the results support your hypothesis and analyze any trends, patterns, or unexpected findings. Discuss possible limitations and implications of your results.

Examples of Experimental Design in Research

• Medicine : Testing a new drug’s effectiveness through a randomized controlled trial, where one group receives the drug and another receives a placebo.
• Psychology : Studying the effect of sleep deprivation on memory using a within-subject design, where participants are tested with different sleep conditions.
• Education : Comparing teaching methods in a quasi-experimental design by measuring students’ performance before and after implementing a new curriculum.
• Marketing : Using a factorial design to examine the effects of advertisement type and frequency on consumer purchase behavior.
• Environmental Science : Testing the impact of a pollution reduction policy through a time series design, recording pollution levels before and after implementation.

Experimental design is fundamental to conducting rigorous and reliable research, offering a systematic approach to exploring causal relationships. With various types of designs and methods, researchers can choose the most appropriate setup to answer their research questions effectively. By applying best practices, controlling variables, and selecting suitable statistical methods, experimental design supports meaningful insights across scientific, medical, and social research fields.

• Campbell, D. T., & Stanley, J. C. (1963). Experimental and Quasi-Experimental Designs for Research . Houghton Mifflin Company.
• Shadish, W. R., Cook, T. D., & Campbell, D. T. (2002). Experimental and Quasi-Experimental Designs for Generalized Causal Inference . Houghton Mifflin.
• Fisher, R. A. (1935). The Design of Experiments . Oliver and Boyd.
• Field, A. (2013). Discovering Statistics Using IBM SPSS Statistics . Sage Publications.
• Cohen, J. (1988). Statistical Power Analysis for the Behavioral Sciences . Routledge.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Triangulation in Research – Types, Methods and...

Quasi-Experimental Research Design – Types...

One-to-One Interview – Methods and Guide

Transformative Design – Methods, Types, Guide

Survey Research – Types, Methods, Examples

Correlational Research – Methods, Types and...

• Call for Articles
•  Login

Experimental Research Design — 6 mistakes you should never make!

Since school days’ students perform scientific experiments that provide results that define and prove the laws and theorems in science. These experiments are laid on a strong foundation of experimental research designs.

An experimental research design helps researchers execute their research objectives with more clarity and transparency.

In this article, we will not only discuss the key aspects of experimental research designs but also the issues to avoid and problems to resolve while designing your research study.

Table of Contents

What Is Experimental Research Design?

Experimental research design is a framework of protocols and procedures created to conduct experimental research with a scientific approach using two sets of variables. Herein, the first set of variables acts as a constant, used to measure the differences of the second set. The best example of experimental research methods is quantitative research .

Experimental research helps a researcher gather the necessary data for making better research decisions and determining the facts of a research study.

When Can a Researcher Conduct Experimental Research?

A researcher can conduct experimental research in the following situations —

• When time is an important factor in establishing a relationship between the cause and effect.
• When there is an invariable or never-changing behavior between the cause and effect.
• Finally, when the researcher wishes to understand the importance of the cause and effect.

Importance of Experimental Research Design

To publish significant results, choosing a quality research design forms the foundation to build the research study. Moreover, effective research design helps establish quality decision-making procedures, structures the research to lead to easier data analysis, and addresses the main research question. Therefore, it is essential to cater undivided attention and time to create an experimental research design before beginning the practical experiment.

By creating a research design, a researcher is also giving oneself time to organize the research, set up relevant boundaries for the study, and increase the reliability of the results. Through all these efforts, one could also avoid inconclusive results. If any part of the research design is flawed, it will reflect on the quality of the results derived.

Types of Experimental Research Designs

Based on the methods used to collect data in experimental studies, the experimental research designs are of three primary types:

1. Pre-experimental Research Design

A research study could conduct pre-experimental research design when a group or many groups are under observation after implementing factors of cause and effect of the research. The pre-experimental design will help researchers understand whether further investigation is necessary for the groups under observation.

Pre-experimental research is of three types —

• One-shot Case Study Research Design
• One-group Pretest-posttest Research Design
• Static-group Comparison

2. True Experimental Research Design

A true experimental research design relies on statistical analysis to prove or disprove a researcher’s hypothesis. It is one of the most accurate forms of research because it provides specific scientific evidence. Furthermore, out of all the types of experimental designs, only a true experimental design can establish a cause-effect relationship within a group. However, in a true experiment, a researcher must satisfy these three factors —

• There is a control group that is not subjected to changes and an experimental group that will experience the changed variables
• A variable that can be manipulated by the researcher
• Random distribution of the variables

This type of experimental research is commonly observed in the physical sciences.

3. Quasi-experimental Research Design

The word “Quasi” means similarity. A quasi-experimental design is similar to a true experimental design. However, the difference between the two is the assignment of the control group. In this research design, an independent variable is manipulated, but the participants of a group are not randomly assigned. This type of research design is used in field settings where random assignment is either irrelevant or not required.

The classification of the research subjects, conditions, or groups determines the type of research design to be used.

Advantages of Experimental Research

Experimental research allows you to test your idea in a controlled environment before taking the research to clinical trials. Moreover, it provides the best method to test your theory because of the following advantages:

• Researchers have firm control over variables to obtain results.
• The subject does not impact the effectiveness of experimental research. Anyone can implement it for research purposes.
• The results are specific.
• Post results analysis, research findings from the same dataset can be repurposed for similar research ideas.
• Researchers can identify the cause and effect of the hypothesis and further analyze this relationship to determine in-depth ideas.
• Experimental research makes an ideal starting point. The collected data could be used as a foundation to build new research ideas for further studies.

6 Mistakes to Avoid While Designing Your Research

There is no order to this list, and any one of these issues can seriously compromise the quality of your research. You could refer to the list as a checklist of what to avoid while designing your research.

1. Invalid Theoretical Framework

Usually, researchers miss out on checking if their hypothesis is logical to be tested. If your research design does not have basic assumptions or postulates, then it is fundamentally flawed and you need to rework on your research framework.

2. Inadequate Literature Study

Without a comprehensive research literature review , it is difficult to identify and fill the knowledge and information gaps. Furthermore, you need to clearly state how your research will contribute to the research field, either by adding value to the pertinent literature or challenging previous findings and assumptions.

3. Insufficient or Incorrect Statistical Analysis

Statistical results are one of the most trusted scientific evidence. The ultimate goal of a research experiment is to gain valid and sustainable evidence. Therefore, incorrect statistical analysis could affect the quality of any quantitative research.

4. Undefined Research Problem

This is one of the most basic aspects of research design. The research problem statement must be clear and to do that, you must set the framework for the development of research questions that address the core problems.

5. Research Limitations

Every study has some type of limitations . You should anticipate and incorporate those limitations into your conclusion, as well as the basic research design. Include a statement in your manuscript about any perceived limitations, and how you considered them while designing your experiment and drawing the conclusion.

6. Ethical Implications

The most important yet less talked about topic is the ethical issue. Your research design must include ways to minimize any risk for your participants and also address the research problem or question at hand. If you cannot manage the ethical norms along with your research study, your research objectives and validity could be questioned.

Experimental Research Design Example

In an experimental design, a researcher gathers plant samples and then randomly assigns half the samples to photosynthesize in sunlight and the other half to be kept in a dark box without sunlight, while controlling all the other variables (nutrients, water, soil, etc.)

By comparing their outcomes in biochemical tests, the researcher can confirm that the changes in the plants were due to the sunlight and not the other variables.

Experimental research is often the final form of a study conducted in the research process which is considered to provide conclusive and specific results. But it is not meant for every research. It involves a lot of resources, time, and money and is not easy to conduct, unless a foundation of research is built. Yet it is widely used in research institutes and commercial industries, for its most conclusive results in the scientific approach.

Have you worked on research designs? How was your experience creating an experimental design? What difficulties did you face? Do write to us or comment below and share your insights on experimental research designs!

Frequently Asked Questions

Randomization is important in an experimental research because it ensures unbiased results of the experiment. It also measures the cause-effect relationship on a particular group of interest.

Experimental research design lay the foundation of a research and structures the research to establish quality decision making process.

There are 3 types of experimental research designs. These are pre-experimental research design, true experimental research design, and quasi experimental research design.

The difference between an experimental and a quasi-experimental design are: 1. The assignment of the control group in quasi experimental research is non-random, unlike true experimental design, which is randomly assigned. 2. Experimental research group always has a control group; on the other hand, it may not be always present in quasi experimental research.

Experimental research establishes a cause-effect relationship by testing a theory or hypothesis using experimental groups or control variables. In contrast, descriptive research describes a study or a topic by defining the variables under it and answering the questions related to the same.

good and valuable

Very very good

Good presentation.

That was clearly understandable

Rate this article Cancel Reply

Your email address will not be published.

Enago Academy's Most Popular Articles

• Promoting Research

Graphical Abstracts Vs. Infographics: Best practices for using visual illustrations for increased research impact

Dr. Sarah Chen stared at her computer screen, her eyes staring at her recently published…

• Publishing Research

10 Tips to Prevent Research Papers From Being Retracted

Research paper retractions represent a critical event in the scientific community. When a published article…

• Industry News

Google Releases 2024 Scholar Metrics, Evaluates Impact of Scholarly Articles

Google has released its 2024 Scholar Metrics, assessing scholarly articles from 2019 to 2023. This…

Ensuring Academic Integrity and Transparency in Academic Research: A comprehensive checklist for researchers

Academic integrity is the foundation upon which the credibility and value of scientific findings are…

• Reporting Research

How to Optimize Your Research Process: A step-by-step guide

For researchers across disciplines, the path to uncovering novel findings and insights is often filled…

Choosing the Right Analytical Approach: Thematic analysis vs. content analysis for…

Comparing Cross Sectional and Longitudinal Studies: 5 steps for choosing the right…

Sign-up to read more

Subscribe for free to get unrestricted access to all our resources on research writing and academic publishing including:

• 2000+ blog articles
• 50+ Webinars
• 10+ Expert podcasts
• 50+ Infographics
• 10+ Checklists
• Research Guides

We hate spam too. We promise to protect your privacy and never spam you.

• Plagiarism Checker
• AI Content Detector
• Academic Editing
• Publication Support Services
• Thesis Editing
• Enago Reports
• Journal Finder
• Thought Leadership
• Diversity and Inclusion
• Al in Academia
• Career Corner
• Other Resources
• Infographics
• Enago Learn
• On-Demand Webinar
• Open Access Week
• Peer Review Week
• Publication Integrity Week
• Conference Videos
• Call for speakers
• Author Training

I am looking for Editing/ Proofreading services for my manuscript Tentative date of next journal submission:

What features do you prefer in a plagiarism detector? (Select all that apply)

• Experimental Research Designs: Types, Examples & Methods

Experimental research is the most familiar type of research design for individuals in the physical sciences and a host of other fields. This is mainly because experimental research is a classical scientific experiment, similar to those performed in high school science classes.

Imagine taking 2 samples of the same plant and exposing one of them to sunlight, while the other is kept away from sunlight. Let the plant exposed to sunlight be called sample A, while the latter is called sample B.

If after the duration of the research, we find out that sample A grows and sample B dies, even though they are both regularly wetted and given the same treatment. Therefore, we can conclude that sunlight will aid growth in all similar plants.

What is Experimental Research?

Experimental research is a scientific approach to research, where one or more independent variables are manipulated and applied to one or more dependent variables to measure their effect on the latter. The effect of the independent variables on the dependent variables is usually observed and recorded over some time, to aid researchers in drawing a reasonable conclusion regarding the relationship between these 2 variable types.

The experimental research method is widely used in physical and social sciences, psychology, and education. It is based on the comparison between two or more groups with a straightforward logic, which may, however, be difficult to execute.

Mostly related to a laboratory test procedure, experimental research designs involve collecting quantitative data and performing statistical analysis on them during research. Therefore, making it an example of quantitative research method .

What are The Types of Experimental Research Design?

The types of experimental research design are determined by the way the researcher assigns subjects to different conditions and groups. They are of 3 types, namely; pre-experimental, quasi-experimental, and true experimental research.

Pre-experimental Research Design

In pre-experimental research design, either a group or various dependent groups are observed for the effect of the application of an independent variable which is presumed to cause change. It is the simplest form of experimental research design and is treated with no control group.

Although very practical, experimental research is lacking in several areas of the true-experimental criteria. The pre-experimental research design is further divided into three types

• One-shot Case Study Research Design

In this type of experimental study, only one dependent group or variable is considered. The study is carried out after some treatment which was presumed to cause change, making it a posttest study.

• One-group Pretest-posttest Research Design: 

This research design combines both posttest and pretest study by carrying out a test on a single group before the treatment is administered and after the treatment is administered. With the former being administered at the beginning of treatment and later at the end.

• Static-group Comparison: 

In a static-group comparison study, 2 or more groups are placed under observation, where only one of the groups is subjected to some treatment while the other groups are held static. All the groups are post-tested, and the observed differences between the groups are assumed to be a result of the treatment.

Quasi-experimental Research Design

  The word “quasi” means partial, half, or pseudo. Therefore, the quasi-experimental research bearing a resemblance to the true experimental research, but not the same.  In quasi-experiments, the participants are not randomly assigned, and as such, they are used in settings where randomization is difficult or impossible.

 This is very common in educational research, where administrators are unwilling to allow the random selection of students for experimental samples.

Some examples of quasi-experimental research design include; the time series, no equivalent control group design, and the counterbalanced design.

True Experimental Research Design

The true experimental research design relies on statistical analysis to approve or disprove a hypothesis. It is the most accurate type of experimental design and may be carried out with or without a pretest on at least 2 randomly assigned dependent subjects.

The true experimental research design must contain a control group, a variable that can be manipulated by the researcher, and the distribution must be random. The classification of true experimental design include:

• The posttest-only Control Group Design: In this design, subjects are randomly selected and assigned to the 2 groups (control and experimental), and only the experimental group is treated. After close observation, both groups are post-tested, and a conclusion is drawn from the difference between these groups.
• The pretest-posttest Control Group Design: For this control group design, subjects are randomly assigned to the 2 groups, both are presented, but only the experimental group is treated. After close observation, both groups are post-tested to measure the degree of change in each group.
• Solomon four-group Design: This is the combination of the pretest-only and the pretest-posttest control groups. In this case, the randomly selected subjects are placed into 4 groups.

The first two of these groups are tested using the posttest-only method, while the other two are tested using the pretest-posttest method.

Examples of Experimental Research

Experimental research examples are different, depending on the type of experimental research design that is being considered. The most basic example of experimental research is laboratory experiments, which may differ in nature depending on the subject of research.

Administering Exams After The End of Semester

During the semester, students in a class are lectured on particular courses and an exam is administered at the end of the semester. In this case, the students are the subjects or dependent variables while the lectures are the independent variables treated on the subjects.

Only one group of carefully selected subjects are considered in this research, making it a pre-experimental research design example. We will also notice that tests are only carried out at the end of the semester, and not at the beginning.

Further making it easy for us to conclude that it is a one-shot case study research. 

Employee Skill Evaluation

Before employing a job seeker, organizations conduct tests that are used to screen out less qualified candidates from the pool of qualified applicants. This way, organizations can determine an employee’s skill set at the point of employment.

In the course of employment, organizations also carry out employee training to improve employee productivity and generally grow the organization. Further evaluation is carried out at the end of each training to test the impact of the training on employee skills, and test for improvement.

Here, the subject is the employee, while the treatment is the training conducted. This is a pretest-posttest control group experimental research example.

Evaluation of Teaching Method

Let us consider an academic institution that wants to evaluate the teaching method of 2 teachers to determine which is best. Imagine a case whereby the students assigned to each teacher is carefully selected probably due to personal request by parents or due to stubbornness and smartness.

This is a no equivalent group design example because the samples are not equal. By evaluating the effectiveness of each teacher’s teaching method this way, we may conclude after a post-test has been carried out.

However, this may be influenced by factors like the natural sweetness of a student. For example, a very smart student will grab more easily than his or her peers irrespective of the method of teaching.

What are the Characteristics of Experimental Research?  

Experimental research contains dependent, independent and extraneous variables. The dependent variables are the variables being treated or manipulated and are sometimes called the subject of the research.

The independent variables are the experimental treatment being exerted on the dependent variables. Extraneous variables, on the other hand, are other factors affecting the experiment that may also contribute to the change.

The setting is where the experiment is carried out. Many experiments are carried out in the laboratory, where control can be exerted on the extraneous variables, thereby eliminating them.

Other experiments are carried out in a less controllable setting. The choice of setting used in research depends on the nature of the experiment being carried out.

• Multivariable

Experimental research may include multiple independent variables, e.g. time, skills, test scores, etc.

Why Use Experimental Research Design?  

Experimental research design can be majorly used in physical sciences, social sciences, education, and psychology. It is used to make predictions and draw conclusions on a subject matter. 

Some uses of experimental research design are highlighted below.

• Medicine: Experimental research is used to provide the proper treatment for diseases. In most cases, rather than directly using patients as the research subject, researchers take a sample of the bacteria from the patient’s body and are treated with the developed antibacterial

The changes observed during this period are recorded and evaluated to determine its effectiveness. This process can be carried out using different experimental research methods.

• Education: Asides from science subjects like Chemistry and Physics which involves teaching students how to perform experimental research, it can also be used in improving the standard of an academic institution. This includes testing students’ knowledge on different topics, coming up with better teaching methods, and the implementation of other programs that will aid student learning.
• Human Behavior: Social scientists are the ones who mostly use experimental research to test human behaviour. For example, consider 2 people randomly chosen to be the subject of the social interaction research where one person is placed in a room without human interaction for 1 year.

The other person is placed in a room with a few other people, enjoying human interaction. There will be a difference in their behaviour at the end of the experiment.

• UI/UX: During the product development phase, one of the major aims of the product team is to create a great user experience with the product. Therefore, before launching the final product design, potential are brought in to interact with the product.

For example, when finding it difficult to choose how to position a button or feature on the app interface, a random sample of product testers are allowed to test the 2 samples and how the button positioning influences the user interaction is recorded.

What are the Disadvantages of Experimental Research?  

• It is highly prone to human error due to its dependency on variable control which may not be properly implemented. These errors could eliminate the validity of the experiment and the research being conducted.
• Exerting control of extraneous variables may create unrealistic situations. Eliminating real-life variables will result in inaccurate conclusions. This may also result in researchers controlling the variables to suit his or her personal preferences.
• It is a time-consuming process. So much time is spent on testing dependent variables and waiting for the effect of the manipulation of dependent variables to manifest.
• It is expensive.
• It is very risky and may have ethical complications that cannot be ignored. This is common in medical research, where failed trials may lead to a patient’s death or a deteriorating health condition.
• Experimental research results are not descriptive.
• Response bias can also be supplied by the subject of the conversation.
• Human responses in experimental research can be difficult to measure.

What are the Data Collection Methods in Experimental Research?  

Data collection methods in experimental research are the different ways in which data can be collected for experimental research. They are used in different cases, depending on the type of research being carried out.

1. Observational Study

This type of study is carried out over a long period. It measures and observes the variables of interest without changing existing conditions.

When researching the effect of social interaction on human behavior, the subjects who are placed in 2 different environments are observed throughout the research. No matter the kind of absurd behavior that is exhibited by the subject during this period, its condition will not be changed.

This may be a very risky thing to do in medical cases because it may lead to death or worse medical conditions.

2. Simulations

This procedure uses mathematical, physical, or computer models to replicate a real-life process or situation. It is frequently used when the actual situation is too expensive, dangerous, or impractical to replicate in real life.

This method is commonly used in engineering and operational research for learning purposes and sometimes as a tool to estimate possible outcomes of real research. Some common situation software are Simulink, MATLAB, and Simul8.

Not all kinds of experimental research can be carried out using simulation as a data collection tool . It is very impractical for a lot of laboratory-based research that involves chemical processes.

A survey is a tool used to gather relevant data about the characteristics of a population and is one of the most common data collection tools. A survey consists of a group of questions prepared by the researcher, to be answered by the research subject.

Surveys can be shared with the respondents both physically and electronically. When collecting data through surveys, the kind of data collected depends on the respondent, and researchers have limited control over it.

Formplus is the best tool for collecting experimental data using survey s. It has relevant features that will aid the data collection process and can also be used in other aspects of experimental research.

Differences between Experimental and Non-Experimental Research 

1. In experimental research, the researcher can control and manipulate the environment of the research, including the predictor variable which can be changed. On the other hand, non-experimental research cannot be controlled or manipulated by the researcher at will.

This is because it takes place in a real-life setting, where extraneous variables cannot be eliminated. Therefore, it is more difficult to conclude non-experimental studies, even though they are much more flexible and allow for a greater range of study fields.

2. The relationship between cause and effect cannot be established in non-experimental research, while it can be established in experimental research. This may be because many extraneous variables also influence the changes in the research subject, making it difficult to point at a particular variable as the cause of a particular change

3. Independent variables are not introduced, withdrawn, or manipulated in non-experimental designs, but the same may not be said about experimental research.

Experimental Research vs. Alternatives and When to Use Them

1. experimental research vs causal comparative.

Experimental research enables you to control variables and identify how the independent variable affects the dependent variable. Causal-comparative find out the cause-and-effect relationship between the variables by comparing already existing groups that are affected differently by the independent variable.

For example, in an experiment to see how K-12 education affects children and teenager development. An experimental research would split the children into groups, some would get formal K-12 education, while others won’t. This is not ethically right because every child has the right to education. So, what we do instead would be to compare already existing groups of children who are getting formal education with those who due to some circumstances can not.

Pros and Cons of Experimental vs Causal-Comparative Research

• Causal-Comparative:   Strengths:  More realistic than experiments, can be conducted in real-world settings.  Weaknesses:  Establishing causality can be weaker due to the lack of manipulation.

2. Experimental Research vs Correlational Research

When experimenting, you are trying to establish a cause-and-effect relationship between different variables. For example, you are trying to establish the effect of heat on water, the temperature keeps changing (independent variable) and you see how it affects the water (dependent variable).

For correlational research, you are not necessarily interested in the why or the cause-and-effect relationship between the variables, you are focusing on the relationship. Using the same water and temperature example, you are only interested in the fact that they change, you are not investigating which of the variables or other variables causes them to change.

Pros and Cons of Experimental vs Correlational Research

3. experimental research vs descriptive research.

With experimental research, you alter the independent variable to see how it affects the dependent variable, but with descriptive research you are simply studying the characteristics of the variable you are studying.

So, in an experiment to see how blown glass reacts to temperature, experimental research would keep altering the temperature to varying levels of high and low to see how it affects the dependent variable (glass). But descriptive research would investigate the glass properties.

Pros and Cons of Experimental vs Descriptive Research

4. experimental research vs action research.

Experimental research tests for causal relationships by focusing on one independent variable vs the dependent variable and keeps other variables constant. So, you are testing hypotheses and using the information from the research to contribute to knowledge.

However, with action research, you are using a real-world setting which means you are not controlling variables. You are also performing the research to solve actual problems and improve already established practices.

For example, if you are testing for how long commutes affect workers’ productivity. With experimental research, you would vary the length of commute to see how the time affects work. But with action research, you would account for other factors such as weather, commute route, nutrition, etc. Also, experimental research helps know the relationship between commute time and productivity, while action research helps you look for ways to improve productivity

Pros and Cons of Experimental vs Action Research

Conclusion  .

Experimental research designs are often considered to be the standard in research designs. This is partly due to the common misconception that research is equivalent to scientific experiments—a component of experimental research design.

In this research design, one or more subjects or dependent variables are randomly assigned to different treatments (i.e. independent variables manipulated by the researcher) and the results are observed to conclude. One of the uniqueness of experimental research is in its ability to control the effect of extraneous variables.

Experimental research is suitable for research whose goal is to examine cause-effect relationships, e.g. explanatory research. It can be conducted in the laboratory or field settings, depending on the aim of the research that is being carried out. 

Connect to Formplus, Get Started Now - It's Free!

• examples of experimental research
• experimental research methods
• types of experimental research
• busayo.longe

You may also like:

Simpson’s Paradox & How to Avoid it in Experimental Research

In this article, we are going to look at Simpson’s Paradox from its historical point and later, we’ll consider its effect in...

Response vs Explanatory Variables: Definition & Examples

In this article, we’ll be comparing the two types of variables, what they both mean and see some of their real-life applications in research

Experimental Vs Non-Experimental Research: 15 Key Differences

Differences between experimental and non experimental research on definitions, types, examples, data collection tools, uses, advantages etc.

What is Experimenter Bias? Definition, Types & Mitigation

In this article, we will look into the concept of experimental bias and how it can be identified in your research

Formplus - For Seamless Data Collection

Collect data the right way with a versatile data collection tool. try formplus and transform your work productivity today..

Experimental Design: Types, Examples & Methods

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Experimental design refers to how participants are allocated to different groups in an experiment. Types of design include repeated measures, independent groups, and matched pairs designs.

Probably the most common way to design an experiment in psychology is to divide the participants into two groups, the experimental group and the control group, and then introduce a change to the experimental group, not the control group.

The researcher must decide how he/she will allocate their sample to the different experimental groups.  For example, if there are 10 participants, will all 10 participants participate in both groups (e.g., repeated measures), or will the participants be split in half and take part in only one group each?

Three types of experimental designs are commonly used:

1. Independent Measures

Independent measures design, also known as between-groups , is an experimental design where different participants are used in each condition of the independent variable.  This means that each condition of the experiment includes a different group of participants.

This should be done by random allocation, ensuring that each participant has an equal chance of being assigned to one group.

Independent measures involve using two separate groups of participants, one in each condition. For example:

• Con : More people are needed than with the repeated measures design (i.e., more time-consuming).
• Pro : Avoids order effects (such as practice or fatigue) as people participate in one condition only.  If a person is involved in several conditions, they may become bored, tired, and fed up by the time they come to the second condition or become wise to the requirements of the experiment!
• Con : Differences between participants in the groups may affect results, for example, variations in age, gender, or social background.  These differences are known as participant variables (i.e., a type of extraneous variable ).
• Control : After the participants have been recruited, they should be randomly assigned to their groups. This should ensure the groups are similar, on average (reducing participant variables).

2. Repeated Measures Design

Repeated Measures design is an experimental design where the same participants participate in each independent variable condition.  This means that each experiment condition includes the same group of participants.

Repeated Measures design is also known as within-groups or within-subjects design .

• Pro : As the same participants are used in each condition, participant variables (i.e., individual differences) are reduced.
• Con : There may be order effects. Order effects refer to the order of the conditions affecting the participants’ behavior.  Performance in the second condition may be better because the participants know what to do (i.e., practice effect).  Or their performance might be worse in the second condition because they are tired (i.e., fatigue effect). This limitation can be controlled using counterbalancing.
• Pro : Fewer people are needed as they participate in all conditions (i.e., saves time).
• Control : To combat order effects, the researcher counter-balances the order of the conditions for the participants.  Alternating the order in which participants perform in different conditions of an experiment.

Counterbalancing

Suppose we used a repeated measures design in which all of the participants first learned words in “loud noise” and then learned them in “no noise.”

We expect the participants to learn better in “no noise” because of order effects, such as practice. However, a researcher can control for order effects using counterbalancing.

The sample would be split into two groups: experimental (A) and control (B).  For example, group 1 does ‘A’ then ‘B,’ and group 2 does ‘B’ then ‘A.’ This is to eliminate order effects.

Although order effects occur for each participant, they balance each other out in the results because they occur equally in both groups.

3. Matched Pairs Design

A matched pairs design is an experimental design where pairs of participants are matched in terms of key variables, such as age or socioeconomic status. One member of each pair is then placed into the experimental group and the other member into the control group .

One member of each matched pair must be randomly assigned to the experimental group and the other to the control group.

• Con : If one participant drops out, you lose 2 PPs’ data.
• Pro : Reduces participant variables because the researcher has tried to pair up the participants so that each condition has people with similar abilities and characteristics.
• Con : Very time-consuming trying to find closely matched pairs.
• Pro : It avoids order effects, so counterbalancing is not necessary.
• Con : Impossible to match people exactly unless they are identical twins!
• Control : Members of each pair should be randomly assigned to conditions. However, this does not solve all these problems.

Experimental design refers to how participants are allocated to an experiment’s different conditions (or IV levels). There are three types:

1. Independent measures / between-groups : Different participants are used in each condition of the independent variable.

2. Repeated measures /within groups : The same participants take part in each condition of the independent variable.

3. Matched pairs : Each condition uses different participants, but they are matched in terms of important characteristics, e.g., gender, age, intelligence, etc.

Learning Check

Read about each of the experiments below. For each experiment, identify (1) which experimental design was used; and (2) why the researcher might have used that design.

1 . To compare the effectiveness of two different types of therapy for depression, depressed patients were assigned to receive either cognitive therapy or behavior therapy for a 12-week period.

The researchers attempted to ensure that the patients in the two groups had similar severity of depressed symptoms by administering a standardized test of depression to each participant, then pairing them according to the severity of their symptoms.

2 . To assess the difference in reading comprehension between 7 and 9-year-olds, a researcher recruited each group from a local primary school. They were given the same passage of text to read and then asked a series of questions to assess their understanding.

3 . To assess the effectiveness of two different ways of teaching reading, a group of 5-year-olds was recruited from a primary school. Their level of reading ability was assessed, and then they were taught using scheme one for 20 weeks.

At the end of this period, their reading was reassessed, and a reading improvement score was calculated. They were then taught using scheme two for a further 20 weeks, and another reading improvement score for this period was calculated. The reading improvement scores for each child were then compared.

4 . To assess the effect of the organization on recall, a researcher randomly assigned student volunteers to two conditions.

Condition one attempted to recall a list of words that were organized into meaningful categories; condition two attempted to recall the same words, randomly grouped on the page.

Experiment Terminology

Ecological validity.

The degree to which an investigation represents real-life experiences.

Experimenter effects

These are the ways that the experimenter can accidentally influence the participant through their appearance or behavior.

Demand characteristics

The clues in an experiment lead the participants to think they know what the researcher is looking for (e.g., the experimenter’s body language).

Independent variable (IV)

The variable the experimenter manipulates (i.e., changes) is assumed to have a direct effect on the dependent variable.

Dependent variable (DV)

Variable the experimenter measures. This is the outcome (i.e., the result) of a study.

Extraneous variables (EV)

All variables which are not independent variables but could affect the results (DV) of the experiment. Extraneous variables should be controlled where possible.

Confounding variables

Variable(s) that have affected the results (DV), apart from the IV. A confounding variable could be an extraneous variable that has not been controlled.

Random Allocation

Randomly allocating participants to independent variable conditions means that all participants should have an equal chance of taking part in each condition.

The principle of random allocation is to avoid bias in how the experiment is carried out and limit the effects of participant variables.

Order effects

Changes in participants’ performance due to their repeating the same or similar test more than once. Examples of order effects include:

(i) practice effect: an improvement in performance on a task due to repetition, for example, because of familiarity with the task;

(ii) fatigue effect: a decrease in performance of a task due to repetition, for example, because of boredom or tiredness.

• Number System and Arithmetic
• Probability
• Mensuration
• Trigonometry
• Mathematics

Experimental Design

Experimental design is reviewed as an important part of the research methodology with an implication for the confirmation and reliability of the scientific studies. This is the scientific, logical and planned way of arranging tests and how they may be conducted so that hypotheses can be tested with the possibility of arriving at some conclusions. It refers to a procedure followed in order to control variables and conditions that may influence the outcome of a given study to reduce bias as well as improve the effectiveness of data collection and subsequently the quality of the results.

What is Experimental Design?

Experimental design simply refers to the strategy that is employed in conducting experiments to test hypotheses and arrive at valid conclusions. The process comprises firstly, the formulation of research questions, variable selection, specifications of the conditions for the experiment, and a protocol for data collection and analysis. The importance of experimental design can be seen through its potential to prevent bias, reduce variability, and increase the precision of results in an attempt to achieve high internal validity of studies. By using experimental design, the researchers can generate valid results which can be generalized in other settings which helps the advancement of knowledge in various fields.

Definition of Experimental Design

Experimental design is a systematic method of implementing experiments in which one can manipulate variables in a structured way in order to analyze hypotheses and draw outcomes based on empirical evidence.

Types of Experimental Design

Experimental design encompasses various approaches to conducting research studies, each tailored to address specific research questions and objectives. The primary types of experimental design include:

Pre-experimental Research Design

• True Experimental Research Design
• Quasi-Experimental Research Design

Statistical Experimental Design

A preliminary approach where groups are observed after implementing cause and effect factors to determine the need for further investigation. It is often employed when limited information is available or when researchers seek to gain initial insights into a topic. Pre-experimental designs lack random assignment and control groups, making it difficult to establish causal relationships.

Classifications:

• One-Shot Case Study
• One-Group Pretest-Posttest Design
• Static-Group Comparison

True-experimental Research Design

The true-experimental research design involves the random assignment of participants to experimental and control groups to establish cause-and-effect relationships between variables. It is used to determine the impact of an intervention or treatment on the outcome of interest. True-experimental designs satisfy the following factors: 

Factors to Satisfy:

• Random Assignment
• Control Group
• Experimental Group
• Pretest-Posttest Measures

Quasi-Experimental Design

A quasi-experimental design is an alternative to the true-experimental design when the random assignment of participants to the groups is not possible or desirable. It allows for comparisons between groups without random assignment, providing valuable insights into causal relationships in real-world settings. Quasi-experimental designs are used typically in conditions wherein the random assignment of the participants cannot be done or it may not be ethical, for example, an educational or community-based intervention.

Statistical experimental design, also known as design of experiments (DOE), is a branch of statistics that focuses on planning, conducting, analyzing, and interpreting controlled tests to evaluate the factors that may influence a particular outcome or process. The primary goal is to determine cause-and-effect relationships and to identify the optimal conditions for achieving desired results. The detailed is discussed below:

Design of Experiments: Goals & Settings

The goals and settings for design of experiments are as follows:

• Identifying Research Objectives: Clearly defining the goals and hypotheses of the experiment is crucial for designing an effective study.
• Selecting Appropriate Variables: Determining the independent, dependent, and control variables based on the research question.
• Considering Experimental Conditions: Identifying the settings and constraints under which the experiment will be conducted.
• Ensuring Validity and Reliability: Designing the experiment to minimize threats to internal and external validity.

Developing an Experimental Design

Developing an experimental design involves a systematic process of planning and structuring the study to achieve the research objectives. Here are the key steps:

• Define the research question and hypotheses
• Identify the independent and dependent variables
• Determine the experimental conditions and treatments
• Select the appropriate experimental design (e.g., completely randomized, randomized block, factorial)
• Determine the sample size and sampling method
• Establish protocols for data collection and analysis
• Conduct a pilot study to test the feasibility and refine the design
• Implement the experiment and collect data
• Analyze the data using appropriate statistical methods
• Interpret the results and draw conclusions

Preplanning, Defining, and Operationalizing for Design of Experiments

Preplanning, defining, and operationalizing are crucial steps in the design of experiments. Preplanning involves identifying the research objectives, selecting variables, and determining the experimental conditions. Defining refers to clearly stating the research question, hypotheses, and operational definitions of the variables. Operationalizing involves translating the conceptual definitions into measurable terms and establishing protocols for data collection.

For example, in a study investigating the effect of different fertilizers on plant growth, the researcher would preplan by selecting the independent variable (fertilizer type), dependent variable (plant height), and control variables (soil type, sunlight exposure). The research question would be defined as "Does the type of fertilizer affect the height of plants?" The operational definitions would include specific methods for measuring plant height and applying the fertilizers.

Randomized Block Design

Randomized block design is an experimental approach where subjects or units are grouped into blocks based on a known source of variability, such as location, time, or individual characteristics. The treatments are then randomly assigned to the units within each block. This design helps control for confounding factors, reduce experimental error, and increase the precision of estimates. By blocking, researchers can account for systematic differences between groups and focus on the effects of the treatments being studied

Consider a study investigating the effectiveness of two teaching methods (A and B) on student performance. The steps involved in a randomized block design would include:

• Identifying blocks based on student ability levels.
• Randomly assigning students within each block to either method A or B.
• Conducting the teaching interventions.
• Analyzing the results within each block to account for variability.

Completely Randomized Design

A completely randomized design is a straightforward experimental approach where treatments are randomly assigned to experimental units without any specific blocking. This design is suitable when there are no known sources of variability that need to be controlled for. In a completely randomized design, all units have an equal chance of receiving any treatment, and the treatments are distributed independently. This design is simple to implement and analyze but may be less efficient than a randomized block design when there are known sources of variability

Between-Subjects vs Within-Subjects Experimental Designs

Here is a detailed comparison among Between-Subject and Within-Subject is tabulated below:

Design of Experiments Examples

The examples of design experiments are as follows:

Between-Subjects Design Example:

In a study comparing the effectiveness of two teaching methods on student performance, one group of students (Group A) is taught using Method 1, while another group (Group B) is taught using Method 2. The performance of both groups is then compared to determine the impact of the teaching methods on student outcomes.

Within-Subjects Design Example:

In a study assessing the effects of different exercise routines on fitness levels, each participant undergoes all exercise routines over a period of time. Participants' fitness levels are measured before and after each routine to evaluate the impact of the exercises on their fitness levels.

Application of Experimental Design

The applications of Experimental design are as follows:

• Product Testing:  Experimental design is used to evaluate the effectiveness of new products or interventions.
• Medical Research:  It helps in testing the efficacy of treatments and interventions in controlled settings.
• Agricultural Studies:  Experimental design is crucial in testing new farming techniques or crop varieties.
• Psychological Experiments:  It is employed to study human behavior and cognitive processes.
• Quality Control:  Experimental design aids in optimizing processes and improving product quality.

In scientific research, experimental design is a crucial procedure that helps to outline an effective strategy for carrying out a meaningful experiment and making correct conclusions. This means that through proper control and coordination in conducting experiments, increased reliability and validity can be attained, and expansion of knowledge can take place generally across various fields. Using proper experimental design principles is crucial in ensuring that the experimental outcomes are impactful and valid.

Also, Check

• What is Hypothesis
• Null Hypothesis
• Real-life Applications of Hypothesis Testing

FAQs on Experimental Design

What is experimental design in math.

Experimental design refers to the aspect of planning experiments to gather data, decide the way in which to control the variable and draw sensible conclusions from the outcomes.

What are the advantages of the experimental method in math?

The advantages of the experimental method include control of variables, establishment of cause-and-effector relationship and use of statistical tools for proper data analysis.

What is the main purpose of experimental design?

The goal of experimental design is to describe the nature of variables and examine how changes in one or more variables impact the outcome of the experiment.

What are the limitations of experimental design?

Limitations include potential biases, the complexity of controlling all variables, ethical considerations, and the fact that some experiments can be costly or impractical.

What are the statistical tools used in experimental design?

Statistical tools utilized include ANOVA, regression analysis, t-tests, chi-square tests and factorial designs to conduct scientific research.

• School Learning
• Math-Statistics

Similar Reads

• jQuery getJSON() Method In this article, we will learn about the getJSON() method in jQuery, along with understanding their implementation through the example. jQuery is an open-source JavaScript library that simplifies the interactions between an HTML/CSS document, It is widely famous for its philosophy of “Write less, do 2 min read
• How to open JSON file ? In this article, we will open the JSON file using JavaScript.  JSON stands for JavaScript Object Notation. It is basically a format for structuring data. The JSON format is a text-based format to represent the data in form of a JavaScript object. Approach: Create a JSON file, add data in that JSON f 2 min read
• How to open json file ? JSON (JavaScript Object Notation) is a lightweight, text-based data format that stores and exchanges data. Let's see how we can create and open a JSON file. How to Create JSON Files?Before learning how to open a JSON file, it's important to know how to create one. Below are the basic steps to create 2 min read
• JSON Schema JSON Schema is a content specification language used for validating the structure of a JSON data.It helps you specify the objects and what values are valid inside the object's properties. JSON schema is useful in offering clear, human-readable, and machine-readable documentation. Structure of a JSON 2 min read
• What is JSON text ? JSON text refers to a lightweight, human-readable format for structuring data using key-value pairs and arrays. It is widely used for data interchange between systems, making it ideal for APIs, configuration files, and real-time communication. In today’s interconnected digital world, data flows seam 4 min read
• ES6 Merge Objects In this article, we are going to learn how to merge two objects in JavaScript. We can merge two JavaScript Objects in ES6 by using the two popular methods. The methods are listed below: Object.assign() methodObject spread syntax method Using Object.assign() method: Using this method, we can merge tw 3 min read
• How To Escape Strings in JSON? JSON (JavaScript Object Notation) is a popular data format that is widely used in APIs, configuration files, and data storage. While JSON is straightforward, handling special characters within strings requires some extra care. Certain characters must be escaped to be valid within a JSON string. Tabl 3 min read
• How to Handle Newlines in JSON? Handling newlines in JSON is essential for maintaining data integrity when dealing with multiline text. JSON, being a text-based format, requires special consideration for newlines to ensure that text appears as intended across different platforms. Proper handling of newlines ensures consistent and 2 min read
• Node.js querystring.encode() Function The querystring.encode() method is used to produce a URL query string from the given object that contains the key-value pairs. The method iterates through the object’s own properties to generate the query string. It can serialize a single or an array of strings, numbers, and boolean. Any other types 2 min read
• Rename Object Key in JavaScript In JavaScript, objects are used to store the collection of various data. It is a collection of properties. A property is a "key: value" pair where Keys are known as 'property name' and are used to identify values. Since JavaScript doesn't provide an inbuilt function to rename an object key. So we wi 4 min read
• String in JavaScript String is used to representing the sequence of characters. They are made up of a list of characters, which is essentially just an "array of characters". It can hold the data and manipulate the data which can be represented in the text form. We can perform different operations on strings like checkin 3 min read
• Add Nested JSON Object in Postman Postman is a helpful tool for testing APIs and working with JSON. It lets you add nested objects to existing JSON. JSON is a simple data format for both humans and machines. Postman also lets developers send requests and view responses, which is really useful for working with JSON data. These are th 2 min read
• Read, Write and Parse JSON using Python JSON is a lightweight data format for data interchange that can be easily read and written by humans, and easily parsed and generated by machines. It is a complete language-independent text format. To work with JSON data, Python has a built-in package called JSON. Example of JSON String s = '{"id":0 4 min read
• Deserializing a JSON into a JavaScript object Deserializing a JSON into a JavaScript object refers to the process of converting a JSON (JavaScript Object Notation) formatted string into a native JavaScript object. This allows developers to work with the data in JavaScript by accessing its properties and methods directly. JavaScript Object Notat 2 min read
• JavaScript JSON parse() Method The JSON.parse() method is used to convert a JSON string into a JavaScript object. It’s become important when dealing with data in JSON format, interacting with APIs, or storing data in the browser. It converts a JSON string into a JavaScript object.Throws a SyntaxError if the input string is not va 4 min read
• How to Receive JSON Data at Server Side ? JavaScript Object Notation (JSON) is a data transferring format used to send data to or from the server. It is commonly utilized in API integration due to its benefits and simplicity. In this example, we will utilize XML HttpRequest to deliver data to the server. Frontend: We will use a simple form 2 min read
• How to Convert String to Variable Name in JavaScript? In JavaScript, if we consider the variable names as string values, it is difficult to transform a variable’s name into a string. However, this problem has been handled in many ways for example, static properties of objects, eval(), and modern ways such as Map can be used to achieve the essential eff 3 min read
• How to Pass Object as Parameter in JavaScript ? We'll see how to Pass an object as a Parameter in JavaScript. We can pass objects as parameters to functions just like we do with any other data type. passing objects as parameters to functions allows us to manipulate their properties within the function. These are the following approaches: Table of 3 min read
• JavaScript JSON Parser JSON (JavaScript Object Notation) is a popular lightweight data exchange format for sending data between a server and a client, or across various systems. JSON data is parsed and interpreted using a software component or library called a JSON parser. Through the JSON parsing process, a JSON string i 3 min read

Improve your Coding Skills with Practice

What kind of Experience do you want to share?